OK TIGROD 13.09 is copper coated 0.5Mo alloyed solid for the GTAW of creep-resistant steels of the same type, such as pipes in pressure vessels and boilers with a working temperature of up to about 500°C. The rod can also be used for high strength low alloy steels.
OK TIGROD 13.16 is a copper coated chromiummolybdenum alloyed (1.3Cr-0.5Mo), solid rod for GTAW of creep resistant steels like SA387 Grade 11, A335 Grade P11 or similar materials. OK TIGROD 13.16 is a high purity wire with a guaranteed Bruscato factor
OK TIGROD 16.10 is a corrosion resistant, chromiumnickel alloyed solid rod for welding austenitic chromiumnickel alloys of 18Cr-8Ni type. OK TIGROD 16.10 has good general corrosion resistance. The alloy has a low carbon content which makes it particularly suitable to the applications, where there is a risk of intergranular corrosion. The alloy is widely used in the chemical and food-processing industries, as well as for pipes, tubes and boilers.
OK TIGROD 16.11 is a corrosion-resistant, chromiumnickel alloyed solid rod for welding stabilized austenitic chromium-nickel alloys of 18Cr-8Ni type. OK TIGROD 16.11 has good general corrosion resistance. The alloy is stabilized with niobium to improve resistance to the intergranular corrosion of the weld metal. Due to the niobium content, this alloy is recommended for use at higher temperatures
OK TIGROD 16.13 is a corrosion-resistant, chromiumnickel alloyed solid rod for welding heat-resistant austenitic stainless steels of 25Cr-20Ni type. OK TIGROD 16.13 has good general oxidation resistance, especially at high temperatures, due to its high Cr content. Common applications include industrial furnaces, boiler parts and heat exchangers.
OK TIGROD 16.30 is a corrosion resistant, chromiumnickel-molybdenum alloyed solid rod for welding austenitic stainless alloys of the 18Cr-8Ni and 18Cr12Ni-2.5Mo types. The alloy has very good resistance to corrosion in acid and chlorinated environments. The alloy has a low carbon content which makes it particularly suitable to the applications, where there is a risk of intergranular corrosion. The alloy is widely used in the chemical and food-processing industries, as well as in shipbuilding and various types of architectural structures.
OK TIGROD 16.30 is a corrosion resistant, chromiumnickel-molybdenum alloyed solid rod for welding austenitic stainless alloys of the 18Cr-8Ni and 18Cr12Ni-2.5Mo types. The alloy has very good resistance to corrosion in acid and chlorinated environments. The alloy has a low carbon content which makes it particularly suitable to the applications, where there is a risk of intergranular corrosion. The alloy is widely used in the chemical and food-processing industries, as well as in shipbuilding and various types of architectural structures.
OK TIGROD 16.54 is a corrosion resistant, chromiumnickel-molybdenum alloyed solid rod for welding dissimilar steels, such as 316L to unalloyed and lowalloyed steels and for overlay welding of unalloyed and low-alloyed steels when Mo is essential.
OK TIGROD 16.54 is a corrosion resistant, chromiumnickel-molybdenum alloyed solid rod for welding dissimilar steels, such as 316L to unalloyed and lowalloyed steels and for overlay welding of unalloyed and low-alloyed steels when Mo is essential.
OK TIGROD 16.54 is a corrosion resistant, chromiumnickel-molybdenum alloyed solid rod for welding dissimilar steels, such as 316L to unalloyed and lowalloyed steels and for overlay welding of unalloyed and low-alloyed steels when Mo is essential.
OK TIGROD 5556A is a solid rod suitable for welding of aluminium alloys (approx. up to 5% Mg) that are not age hardenable and alloys where a high tensile strength is required. The corrosion resistance in a marine atmosphere is very good.
OK TIGROD 5556A is a solid rod suitable for welding of aluminium alloys (approx. up to 5% Mg) that are not age hardenable and alloys where a high tensile strength is required. The corrosion resistance in a marine atmosphere is very good.
ESAB MW1 is a copper coated, Mn-Si alloyed solid wire for GMAW of non alloyed steels, used in general construc-tion, automotives, ship building and pressure vessel fabrication. The wire has a carefully controlled wire chemistry and a unique surface technology providing superior weld metal quality at high wire feed speeds and at high welding currents.
ESAB MW1 is a copper coated, Mn-Si alloyed solid wire for GMAW of non alloyed steels, used in general construc-tion, automotives, ship building and pressure vessel fabrication. The wire has a carefully controlled wire chemistry and a unique surface technology providing superior weld metal quality at high wire feed speeds and at high welding currents.
OK FLUX 10.71L is a basic agglomerated, slightly Si and Mn alloying fl ux for submerged arc welding. It is specially designed for fi llet welding and single and multi pass butt welding of mild, medium and high tensile steels. The fl ux is of aluminate basic type and it has a very high current carrying capacity on both AC and DC with very good operating characteristics. OK FLUX 10.71L is also suited to narrow gap welding due to the excellent slag detachability and smooth side-wall blending.
OK FLUX 10.81L is an acidic agglomerated Si and Mnalloying fl ux for submerged arc welding. It provides exceptional welding characteristics with a slag system that allows higher welding speeds. It is specially designed for use in combination with OK AUTROD 12.08L.
