ARC Equipments
  1. home
  2. products
  3. ESAB
  4. ARC Equipments

TRANSWELD 400

ESAB Transweld 400 is a 400 Amp. Manual Arc Welding Transformer that combines unique functional and safety features. Ensures excellent welding quality with economy. And it is natural air cooled. That means, it won’t fail even in the most uncertain conditions. Ideal for use at site. Or in a workshop.

LHJ 750 WITH V/A METER

LHJ 425 is a rectifier designed for the welding of electrodes. LHJ 750 is a rectifier designed for the welding of stick electrodes and gouging.

RS 400x

RS 400x is a fully thyristorised MMA welding equipment designed for high productivity and heavy duty cycle applications.

RS 400

Reliable and high performance Low Power Consumption MMA welding rectifier for projects, construction and pipe welding.

EASY WELD SSR 600

ESAB EASYWELD SSR series, fully thyristorised MMA welding rectifiers are built using state of the art solid state technology and is designed to meet the stringent demands of high quality radiographic welding for today's fabricating industries, including Nuclear Power Plants, Chemical Process Plants, Offshore Work, Defence, Steel Plant, Thermal Power Plants, Mining and Structural Fabrications etc.

ROGUE ES200i Pro

Rogue, like every ESAB machine, is backed by our commitment to superior customer service and support. Our skilled customer service department is prepared to quickly answer any questions, address problems, and help with maintenance and upgrading of machines.

ARC 200i

Heavy Duty Inverter Arc 250i is a single phase Inverter Welding machine designed for heavy duty applications and is designed for continuous welding with 4.0mm welding electrodes.

HANDY ARC 200i

HANDY Arc 200i is a single phase Inverter Welding machine designed for heavy duty applications and is designed for continuous welding with 4.0mm welding electrodes.

Xpert Weld 200

Heavy Duty Inverter Xpert Weld 200 is a single phase Inverter Welding machine designed for heavy duty applications and is designed for continuous welding with 4.0mm welding electrodes.

ARC 300i

Arc 300i is an IGBT based Inverter controlled power source designed for MMA welding. The compact design enables easy portability with continuous welding capabilities.

ARC 400i

Arc 400i is an IGBT based inverter controlled power source designed for MMA welding. The power source is designed as a compact power source for easy portability.

BUDDY ARC 400i XC

The Buddy™ Arc 400i and 400i XC are heavy duty, fan cooled, IGBT based inverter controlled power sources meant for MMA / TIG (scratch-start) welding.

ARC 630i

Arc 630i is heavy duty IGBT based inverter power source suitable for MMA welding, Air Carbon Arc Gouging (A-CAG), Scratch TIG and designed for 24x7 usage.

CADDY ARC 251i A34 PKG

Burns up to 4.0 mm electrodes of any class continuously. Rugged design - impact resistant polymer design. Built-in PFC to eliminate harmonics, digital display, Arc Plus II regulator common in A32 / A34 control panel.

MIGMATIC 250 RTW PACKAGE

Migmatic 250 allows high speed welding without compromising quality on thin sheets having the wire feeder as a separable unit.

AUTO K 400

Auto K 400 / 600 is one of the proven equipments for semiautomatic and mechanized welding applications on account of its excellent arc stability and smooth welding. Servo wire feeder with remote pendant and PSF range of torches enhances the performance.

AUTO K 600

Auto K 400 / 600 is one of the proven equipments for semiautomatic and mechanized welding applications on account of its excellent arc stability and smooth welding. Servo wire feeder with remote pendant and PSF range of torches enhances the performance.

MIG C250i

MIG C250i is a compact multi-voltage IGBT inverter MIG Equipment with in-built wire-feeder & trolley. The compact MIG power source can also be used for MMA welding applications.

MIG 301i

MIG 301i is a heavy duty IGBT based inverter welding power source with strong wire feeder and user friendly control panel designed for continuous usage in small and medium fabrications.

FEEDER FOR BUDDY MIG - VARIOUS SIZES

MIG 400I CCCV
BUDDY MIG 400i
BUDDY MIG 400i CO2 PACKAGE
BUDDY FEED 402
CON SET FEED 402, 5M
CON SET FEED 402, 10M
CON SET FEED 402, 15M

Buddy™ Tig 400i is an IGBT based inverter controlled power source meant for HF TIG and MMA welding in compliance with International Standards.

FEEDER FOR FABRICATOR PRO EM 500I

FABRICATOR PRO EM 500i
FABRICATOR PRO FEED 364
INTERCONNECTION CABLE SET,5m
INTERCONNECTION CABLE SET, 10m

An Ideal blowpipe for welding various metal in general heating purpose. It is supplied with tips suitable for welding mild steel in the range of 1.25mm to 8.5mm thikness.

PSF 260, 3m
PSF 260, 5m
PSF 415, 3m
PSF 415, 5m
PSF 505, 3m
PSF 505, 4.5m

ROGUE ET200iP

Rogue's next level technology gives precise, professional and consistent control for a smooth, stable performance every time. No other machine comes close to matching Rogue's strength. The ESAB DNA code gives great robustness locked in very compact housing. The High frequency TIG start ensures you do not experience failure on ignition. The advanced TIG controls including gas pre flow, post flow, start current, end current helps deliver superior quality.

CADDY TIG 2200i TA34

The Caddy™ is already a classic power source in the mobile welding equipment field. With the introduction of the Caddy™ Tig 2200i AC/DC series (TA33 and TA34) and a full range of accessories, you will find the optimal solution for a wide range of TIG welding applications.

RENEGADE ET 300iP

Renegade ET 300iP is an inverter based High Frequency TIG (HF) equipment with extreme Power to Weight Ratio. The Rugged design enables it to be used in extreme conditions of heat, dust and with long lead cables. The intelligent design detects input voltage (1ph 230V or 3ph 208 to 528V) and automatically makes adjustment for smooth operation.

TIG 300i

TIG 300i is an IGBT based inverter controlled power source for TIG Welding. Its compact design combines power for heavy duty applications with portability. Its good welding performance in both TIG & MMA offers flexibility for a wide range of applications.

BUDDY TIG 400i

Buddy™ Tig 400i is an IGBT based inverter controlled power source meant for HF TIG and MMA welding in compliance with International Standards.

TIG 401iw

TIG 400iw is an IGBT based inverter welding power source with in-built HF unit, cooling unit and water cooling torch for continuous welding applications.

CADDY TIG 2200i AC/DC, TA34 AC/DC

The Caddy™ is already a classic power source in the mobile welding equipment field. With the introduction of the Caddy™ Tig 2200i AC/DC series (TA33 and TA34) and a full range of accessories, you will find the optimal solution for a wide range of TIG welding applications.

ORIGO TIG 3000i AC/DC, TA24 AC/DC

In both DC and AC mode this TIG welding machine will give an excellent start and stable arc. All types of material and thickness can be welded with the highest quality.

TIG 310i

TIG 310i is a digitally controlled AC/DC TIG inverter welding power source with HF start and consistent, stable arc in both DC and AC modes. Its Integrated cooling unit ensure trouble free welding for heavy duty applications.

HANDYPLASMA 45i

After years of development, the HandyPlasma has finally arrived - a light and portable hand-held plasma cutting machine, weighing only 13.5kg (including the torch), with a 220V 50/60Hz single phase power supply.

ESAB CUTMASTER 60i, SL 60QD 6M

When it comes to power and weight, Cutmaster 60i has the balance down. At only 16.2 kg, its compact and lightweight design makes it super portable – but we didn’t sacrifice power or performance to get there. So if it’s too much power for a given job, just turn it down.

ESAB CUTMASTER 100, SL 100 6.1M

The ESAB Cutmaster 100 weighing about 28 Kgs is one of lightest equipment for cutting 35mm all day. This unit’s light weight and compact design makes it the most portable and powerful cutting machine.

ESAB CUTMASTER 120, SL 100 6.1M

The ESAB Cutmaster 100 weighing about 28 Kgs is one of lightest equipment for cutting 35mm all day. This unit’s light weight and compact design makes it the most portable and powerful cutting machine.

SL 60 TORCH 75 DEG 6.1M
SL 100 TORCH 75 DEG 6.1M

CPRA 1200(S)

CPRA 800(S)/1200(S) are heavy duty step controlled power sources for SAW. It is used with SAW Tractor LY – a tractor mounted SAW welding head for a wide range of applications.

CPRA 1250i + SAW TRACTOR CPRA

Tips are manufactured from copper tubes which have swaged interior -Gas passaged are mirror smooth with internal angles rounded, non-turbulent -More efficient gas flow.
Wide range of Tips of different sizes -Optimum consumption of gas with use of correct size of tips.